HP Mini 110-3500 HP Mini 110, Compaq Mini CQ10 and HP Mini 1103 - Maintenance - Page 48
Hard drive, Lift the Mylar
View all HP Mini 110-3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Hard drive Description Hard drive: 320-GB, 7200-rpm 250-GB, 7200-rpm 160-GB, 7200-rpm Hard Drive Hardware Kit (includes hard drive bracket, screws, and Mylar cover) Hard Drive Cable Kit Spare part number 627731-001 635225-001 635760-001 633491-001 628532-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Battery (see Battery on page 35). b. Service access cover (see Service access cover on page 38). Remove the hard drive: 1. Lift the Mylar (1) that covers the hard drive connector on the system board. 2. Disconnect the hard drive cable (2) from the system board. 3. 4. Remove the 3 Phillips 2.0×4.0 screws (3) that secure the hard drive to the computer. 5. Lift the Mylar (4) that covers the hard drive to allow removal of the drive. 40 Chapter 4 Removal and replacement procedures