HP Mini 110-3500 HP Mini 110, Compaq Mini CQ10 and HP Mini 1103 - Maintenance - Page 65
Open the computer as far as possible., Disconnect the display panel cable
View all HP Mini 110-3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Remove the display assembly: 1. Close the computer. 2. Turn the computer upside down, with the front toward you. 3. Release the WLAN antenna cables (1) from the clips (2) built into the base enclosure. 4. Turn the computer right-side up, with the front toward you. 5. Open the computer as far as possible. 6. Disconnect the display panel cable (1) from the system board. Component replacement procedures 57
Remove the display assembly:
1.
Close the computer.
2.
Turn the computer upside down, with the front toward you.
3.
Release the WLAN antenna cables
(1)
from the clips
(2)
built into the base enclosure.
4.
Turn the computer right-side up, with the front toward you.
5.
Open the computer as far as possible.
6.
Disconnect the display panel cable
(1)
from the system board.
Component replacement procedures
57