HP Nw9440 HP Compaq nx9420 and nx9440 Notebook PC - Maintenance and Service Gu - Page 171
Remove the Torx8 T8M2.5×7.0 screw, Slide the system board
UPC - 882780782174
View all HP Nw9440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Removal and Replacement Procedures 3. Remove the Torx8 T8M2.5×7.0 screw 1 that secures the system board to the base enclosure. 4. Use the optical drive connector 2 to lift the right side of the system board until it rests at an angle. 5. Slide the system board 3 to the right at an angle until it clears the base enclosure. Removing the System Board Maintenance and Service Guide 5-71
Removal and Replacement Procedures
Maintenance and Service Guide
5–71
3. Remove the Torx8 T8M2.5×7.0 screw
1
that secures the
system board to the base enclosure.
4. Use the optical drive connector
2
to lift the right side of the
system board until it rests at an angle.
5.
Slide the system board
3
to the right at an angle until it clears
the base enclosure.
Removing the System Board