HP PSC 2100 HP PSC 2100 Series all-in-one - (United Kingdom) Reference Guide - Page 20
increase copy speed or quality, set the number of copies, reduce or enlarge a copy - ink
View all HP PSC 2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
hp psc 2100 series increase copy speed or quality set the number of copies reduce or enlarge a copy make copies lighter or darker The HP PSC provides three options that affect copy speed and quality. • Best produces the highest quality for all paper and eliminates the banding (striping) effect that sometimes occurs in solid areas. Best copies more slowly than the other quality settings. • Normal delivers high-quality output and is the recommended setting for most of your copying. Normal copies faster than Best. • Fast copies faster than the Normal setting. The text is of comparable quality to the Normal setting, but the graphics may be of lower quality. Using Fast also cuts down on the frequency of replacing your print cartridges, because it uses less ink. 1 Load your original on the glass. 2 Press Quality until the green light in front of the desired quality is lit. 3 Press Start Copy, Black or Start Copy, Color. You can set the number of copies using the front panel. 1 Do one of the following: - Press Copies (1-99) until the desired number of copies appears. - Press Copies (1-99), then press or to select the number of copies. If you hold down the right arrow button, the number of copies changes by increments of 5 to make it easier to set a large number of copies. 2 Press Start Copy, Black or Start Copy, Color. You can reduce or enlarge a copy of an original using Reduce/Enlarge. For more information about additional copy options such as Fit to Page, Many on a Page, and Poster, see perform special copy jobs on page 18. 1 Press Copy Options until Reduce/Enlarge appears. 2 Press Enter to select the option. 3 Press to choose a Reduce/Enlarge option. 4 If you are using the Custom option, press Enter, then press or to select a percentage. Press Enter when the desired percentage is displayed. 5 Press Start Copy, Black or Start Copy, Color. Use Lighter/Darker to adjust the lightness and darkness of the copies you make. 1 Press Copy Options until Lighter/Darker appears, and then press Enter. The range of Lighter/Darker values appears as a circle on a scale on the front-panel display. 2 Press to lighten the copy or to darken it. 16 use the copy features