HP PageWide Managed P75050 Printhead Assembly Install Guide - Page 13

11 11.1 1 11.2 1 Reverse the removal steps to install the assembly. Also use the following special installation instructions. SPECIAL INSTALLATION INSTRUCTIONS: Standard output bin a. Before proceeding, locate the mounting rail (callout 1) on the output bin.. 11.3 b. Before proceeding, locate the mounting rail (callout1) on the printer. 11.4 c. Align the mounting rail on the output bin with the mounting rail on the printer. 11.5 d. Slide the output bin about halfway in, and then slightly lift the right side of the output bin so that the inner clip (callout 1) will pass over the sheet-metal chassis (callout 2). 11.6 e. Continue to slide the output bin into place, and make sure that the inner clip (callout 1) engages the slot in the sheet-metal chassis (callout 2). f. Slide the output bin straight onto the printer. IMPORTANT: Slide the output bin completely into place. Make sure it slides straight onto the printer. 13