HP PageWide Managed P75050 Printhead Assembly Install Guide - Page 5
Remove the middle internal cover
 |
View all HP PageWide Managed P75050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
6 Remove the middle internal cover 6.1 1 6.2 Remove five screws (callout 1). 6.3 2 1 Lift up the middle of the output bin up and pull out on the middle internal front cover to release one tab. 6.4 1 Rotate the top edge of the cover away from the printer (callout 1), and then lift the cover up to release it (callout 2). CAUTION: The cover is still attached to the printer by a flat-flexible cable (FFC). Do not attempt to completely remove the cover. Disconnect one FFC and release the ferrite from the holder (callout 1), and then remove the cover. 5
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
Remove the middle internal cover
6
6.1
6.3
6.4
6.2
Remove five screws (callout 1).
Rotate the top edge of the cover away from the printer (callout 1), and then
lift the cover up to release it (callout 2).
CAUTION
: The cover is still attached to the printer by a flat-flexible cable (FFC).
Do not attempt to completely remove the cover.
Disconnect one FFC and release the ferrite from the holder (callout 1), and
then remove the cover.
Lift up the middle of the output bin up and pull out on the middle internal
front cover to release one tab.
1
1
2
1
5