HP PageWide Managed P75050 Printhead Assembly Install Guide - Page 6

7 Remove the output bin 7.1 2 7.2 1 1 Disconnect one flat-flexible cable (FFC), and then remove two screws (callout 2). Remove two flaps (callout 1) from the output shaft. NOTE: These flaps snap onto the shaft. 7.3 7.4 2 1 777zt and 777hc/z only: At the right side of the printer, pull out the output bin alignment bar to remove it. Squeeze two tabs together (callout 1), and then slightly slide the output bin towards the front of the printer (callout 2).). 7.5 Pull the output bin straight out of the printer to remove it. 6