HP PageWide Managed P75050 Printhead Assembly Install Guide - Page 15
Special Installation Instruction: Printhead Assembly
View all HP PageWide Managed P75050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
12.3 12.4 c. At the left side service fluid container mounting rail, rotate the blue latch to the open position. d. Rotate the left mounting pin up and out of the rail (callout 1), slightly slide the service fluid container to the left (callout 2) to release the right mounting rail pin, and then remove the service fluid container (callout 3). 13 SPECIAL INSTALLATION INSTRUCTION: PRINTHEAD ASSEMBLY (install a replacement service fluid container) CAUTION: A replacement service fluid container is supplied with a replacement printhead assembly. The replacement service fluid container must be installed before the printer power is turned on after installing the replacement print head assembly. Follow the instructions below to install a replacement service fluid container NOTE: After the replacement fluid service container is installed, do one of the following • HP PageWide Pro 750/772/777: go to step 14. • HP PageWide Enterprise 765/780/785: go to step 15. 13.1 13.2 a. Position the service fluid container right rail pin in the mounting rail (callout 1/2), and then rotate the left rail mounting pin down and into the rail (callout 3). b. At the left side service fluid container mounting rail, rotate the blue latch to the closed position. 15