HP Pavilion 11-ap0000 Maintenance and Service Guide - Page 33

Battery, Release the speaker cables from the retention clips/routing channels

Get HP Pavilion 11-ap0000 PDF manuals and user guides View all HP Pavilion 11-ap0000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Battery Table 5-2 Battery description and spare part number information Description 2-cell, 37-WHr, 4.96-AHr, Li-ion battery Spare part number 824536-856 Before removing the battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). Remove the battery: 1. Disconnect the battery cable (1) from the system board. 2. Release the speaker cables from the retention clips/routing channels (2) built into the front edge of the battery. 3. Remove the four Phillips M2.0×3.0 screws (3) that secure the battery to the keyboard/top cover. 4. Remove the battery (4). Reverse this procedure to install the battery. Component replacement procedures 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Battery
Table 5-2
Battery description and spare part number information
Description
Spare part number
2-cell, 37-WHr, 4.96-AHr, Li-ion battery
824536-856
Before removing the battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
23
).
Remove the battery:
1.
Disconnect the battery cable
(1)
from the system board.
2.
Release the speaker cables from the retention clips/routing channels
(2)
built into the front edge of
the battery.
3.
Remove the four Phillips M2.0×3.0 screws
(3)
that secure the battery to the keyboard/top cover.
4.
Remove the battery
(4)
.
Reverse this procedure to install the battery.
Component replacement procedures
25