HP Pavilion 11-ap0000 Maintenance and Service Guide - Page 37
Solid-state drive, Remove the solid-state drive
View all HP Pavilion 11-ap0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Solid-state drive Table 5-5 Solid-state drive description and spare part number information Description 256-GB, PCIe, NVMe solid-state drive 128-GB, M.2, SATA-3, solid-state drive with TLC Solid-state drive shield Spare part number L52050-001 L52441-001 L52441-001 Before removing the solid-state drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 23). 5. Disconnect the battery cable from the system board (see Battery on page 25). Remove the solid-state drive: 1. Remove the Phillips M2.0×2.2 broad head screw (1) that secures the solid-state drive to the system board. 2. Remove the solid-state drive (2) by pulling it away from the slot. Reverse this procedure to reassemble and install the solid-state drive. Component replacement procedures 29