HP Pavilion dv3-2000 HP Pavilion dv3 Entertainment PC - Maintenance and Servic - Page 59
Remove the Phillips PM2.5×3.0 screw, by pulling the module away from the slot at an angle.
View all HP Pavilion dv3-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Removal and replacement procedures 3. Remove the Phillips PM2.5×3.0 screw 1 that secures the WLAN module bracket to the computer. 4. Remove the WLAN module bracket 2. (The edge of the module opposite the slot rises away from the computer.) 5. Disconnect the WLAN antenna cables 3 from the terminals on the WLAN module. ✎ The black WLAN antenna cable is connected to the WLAN module "Main" terminal. The white WLAN antenna cable is connected to the WLAN module "Aux" terminal. 6. Remove the WLAN module 4 by pulling the module away from the slot at an angle. ✎ WLAN modules are designed with a notch 5 to prevent incorrect insertion of the WLAN module into the WLAN module slot. Reverse this procedure to install the WLAN module. 4-14 Maintenance and Service Guide