HP Pavilion dv3-2000 HP Pavilion dv3 Entertainment PC - Maintenance and Servic - Page 78
until the bezel disengages from the display enclosure., and the bottom edge of the display bezel
View all HP Pavilion dv3-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Removal and replacement procedures ✎ Steps 22 through 38 provide display assembly internal component removal information for computer models equipped with BrightView display assemblies. See steps 5 through 21 for display assembly internal component removal information for computer models equipped with AntiGlare display assemblies. 22. If it is necessary to replace the display bezel or any of the display assembly internal components, remove the Mylar screw covers 1 and the two Phillips PM2.5×6.0 screws 2 on the display bezel lower edge. 23. Flex the inside edges of the top edge 1, the left and right sides 2, and the bottom edge of the display bezel 3 until the bezel disengages from the display enclosure. 24. Remove the display bezel 4. The display bezel is available using the following spare part numbers: ❏ 531794-001-for use only with computer models equipped with a 13.4-inch display assembly ❏ 531788-001-for use only with computer models equipped with a 13.3-inch display assembly. Maintenance and Service Guide 4-33