HP Pavilion dv3-2000 HP Pavilion dv3 Entertainment PC - Maintenance and Servic - Page 85

through the openings in the top cover., Route the power connector cable and the USB board cable

Get HP Pavilion dv3-2000 - Entertainment Notebook PC PDF manuals and user guides View all HP Pavilion dv3-2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 85 highlights

Removal and replacement procedures 12. Remove the three Phillips PM2.0×6.0 screws 1 and the two Phillips PM2.0×3.0 screws 2 that secure the top cover to the base enclosure. 13. Lift the rear edge of the top cover 1 until it rests at an angle. 14. Route the power connector cable and the USB board cable 2 through the openings in the top cover. 15. Remove the top cover 3 by lifting it straight up. Reverse this procedure to install the top cover. 4-40 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
4–40
Maintenance and Service Guide
Removal and replacement procedures
12. Remove the three Phillips PM2.0×6.0 screws
1
and the two Phillips PM2.0×3.0 screws
2
that secure the top
cover to the base enclosure.
13. Lift the rear edge of the top cover
1
until it rests at an angle.
14. Route the power connector cable and the USB board cable
2
through the openings in the top cover.
15. Remove the top cover
3
by lifting it straight up.
Reverse this procedure to install the top cover.