HP Pavilion dv3-2000 HP Pavilion dv3 Entertainment PC - Maintenance and Servic - Page 84
Disconnect the TouchPad on/off button board cable, Disconnect the TouchPad cable
View all HP Pavilion dv3-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Removal and replacement procedures 3. Disconnect the power connector cable 1 from the system board. 4. Disconnect the USB board cable 2 from the system board. 5. Remove the power connector cable and USB board cable from the clips 3 built into the top cover. 6. Disconnect the caps lock LED cable 4 from the LIF connector on the system board. 7. Detach the caps lock LED cable 5 from the top cover. The caps lock LED cable is attached to the top cover with double-sided tape. 8. Disconnect the TouchPad cable 1 from the LIF connector on the system board. 9. Disconnect the TouchPad on/off button board cable 2 from the LIF connector on the system board. 10. Release the ZIF connector 3 to which the fingerprint reader board cable is attached and disconnect the fingerprint reader board cable 4 from the system board. 11. Disconnect the fan cable 5 from the system board. Maintenance and Service Guide 4-39