HP Pavilion dv3-2000 HP Pavilion dv3 Entertainment PC - Maintenance and Servic - Page 71
and swing it up and forward until it detaches from the computer., Remove the switch cover.
View all HP Pavilion dv3-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Removal and replacement procedures 2. Turn the computer display-side up with the front toward you. 3. Open the computer as far as possible. 4. Disconnect the LED board cable 1 from the low insertion force (LIF) connector on the system board. 5. Lift the rear edge of the switch cover 2 and swing it up and forward until it detaches from the computer. 6. Remove the switch cover. Reverse this procedure to install the switch cover. 4-26 Maintenance and Service Guide
4–26
Maintenance and Service Guide
Removal and replacement procedures
2. Turn the computer display-side up with the front toward you.
3. Open the computer as far as possible.
4. Disconnect the LED board cable
1
from the low insertion force (LIF) connector on the system board.
5. Lift the rear edge of the switch cover
2
and swing it up and forward until it detaches from the computer.
6. Remove the switch cover.
Reverse this procedure to install the switch cover.