HP Pavilion dv7 HP Pavilion dv6 Entertainment PC - Maintenance and Service Gui - Page 51

Removal and replacement procedures TV tuner module ✎ The TV tuner module spare part kit does not include a TV tuner module cable. The TV tuner module cable is included in the Cable Kit, spare part number 512832-001. ✎ The TV tuner external antenna cables are available using spare part numbers 482900-001 (with F-PAL jack) and 482900-002 (with PAL jack). Description DVB-T TV tuner module DVB-T/ANG TV tuner module ATSC/NTSC/QAM hybrid TV tuner module Spare part number 482899-003 482899-002 482899-001 Before removing the TV tuner module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-6). 5. Remove the memory module compartment cover (see "Memory module" on page 4-10). Remove the TV tuner module: 1. Disconnect the TV tuner module antenna cable 1 from the terminal on the TV tuner module. 2. Remove the Phillips PM2.0×3.0 screw 2 that secures the TV tuner module to the computer. 3. Lift the edge of the TV tuner module 3, and pull the module away from the slot at an angle. ✎ The TV tuner module is designed with a notch 4 to prevent incorrect insertion into the TV tuner module slot. Reverse this procedure to install the TV tuner module. 4-12 Maintenance and Service Guide