HP Pavilion dv7 HP Pavilion dv6 Entertainment PC - Maintenance and Service Gui - Page 53
Hard drive, Loosen the two Phillips PM2.5×5.5 captive screws
View all HP Pavilion dv7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Removal and replacement procedures Hard drive ✎ The hard drive spare part kit includes left and right bracket rails, a connector cable, Mylar cover with tab, and 4 rubber isolators. Description 500-GB, 7200-rpm hard drive 500-GB, 5400-rpm hard drive 320-GB, 7200-rpm hard drive 320-GB, 5400-rpm hard drive 250-GB, 7200-rpm hard drive 250-GB, 5400-rpm hard drive Hard Drive Hardware Kit (includes left and right bracket rails, connector cable, Mylar cover with tab, and 4 rubber isolators) Spare part number 575402-001 511879-001 511876-001 511877-001 511874-001 511875-001 483862-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-6). Remove the hard drive: 1. Position the computer with the front toward you. 2. Loosen the two Phillips PM2.5×5.5 captive screws 1 that secure the hard drive port bezel cover to the computer. 3. Lift the right side 2 of the hard drive port bezel cover, swing it up and to the left, and remove the cover 3. The spare hard drive port bezel cover is included in the Plastics Kit, 579162-001. 4-14 Maintenance and Service Guide