HP Pavilion g4 Maintenance and Service Guide - Page 73
TouchPad LED board, Turn the top cover upside down, with the front toward you.
View all HP Pavilion g4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
5. Remove the TouchPad button board (4) and cable. Reverse this procedure to install the TouchPad button board and cable. TouchPad LED board Description TouchPad LED board (includes cable) Spare part number 640292-001 Before removing the TouchPad LED board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 48), and then remove the following components: ● Optical drive (see Optical drive on page 49) ● Hard drive (see Hard drive on page 51) ● Keyboard (see Keyboard on page 56) ● Top cover (see Top cover on page 59) Remove the TouchPad LED board and cable: 1. Turn the top cover upside down, with the front toward you. 2. Release the ZIF connector (1) to which the TouchPad LED board cable is connected, and then disconnect the TouchPad LED board cable (2) from the TouchPad button board. Component replacement procedures 65