HP Presario CQ20-100 Compaq Presario CQ20 Notebook PC - Maintenance and Servic - Page 54

Remove the display bezel, of the display bezel until the bezel disengages from the display enclosure.

Get HP Presario CQ20-100 - Notebook PC PDF manuals and user guides View all HP Presario CQ20-100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Removal and replacement procedures b. Remove the two PM2.0×5.0 screws 1 and two PM3.0×6.0 2 screws that secure the display bezel to the display enclosure. c. Lift the inside edge of the left and right sides 1 to disengage it from the clips, and then the top and bottom sides 2 of the display bezel until the bezel disengages from the display enclosure. d. Remove the display bezel 3. The display bezel is available using spare part number 492156-001. Reverse this procedure to install the display bezel. Be careful to route the cables through the side openings in the hinge covers and avoid pinching the cables between the bezel and display enclosure. Maintenance and Service Guide 4-25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
Removal and replacement procedures
Maintenance and Service Guide
4–25
b.
Remove the two PM2.0×5.0 screws
1
and two PM3.0×6.0
2
screws that secure the display bezel to the
display enclosure.
c.
Lift the inside edge of the left and right sides
1
to disengage it from the clips, and then the top and bottom
sides
2
of the display bezel until the bezel disengages from the display enclosure.
d.
Remove the display bezel
3
. The display bezel is available using spare part number 492156-001.
Reverse this procedure to install the display bezel. Be careful to route the cables through the side openings in the
hinge covers and avoid pinching the cables between the bezel and display enclosure.