HP Presario CQ41-100 Compaq Presario CQ41 Notebook PC - Maintenance and Servic - Page 64
Remove the Phillips PM2.5×6.0 screw, is connected and disconnect the cable
View all HP Presario CQ41-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Removal and replacement procedures 3. Turn the computer display-side up, with the front toward you. 4. Open the computer as far as possible. 5. Remove the Phillips PM2.5×6.0 screw 1 from the front left corner of the keyboard cover. 6. Release the ZIF connector to which the power button board cable 2 is connected and disconnect the cable from the system board. 7. Lift and remove the keyboard cover 3 from the computer. Reverse this procedure to install the keyboard cover. Maintenance and Service Guide 4-25
Removal and replacement procedures
Maintenance and Service Guide
4–25
3. Turn the computer display-side up, with the front toward you.
4. Open the computer as far as possible.
5. Remove the Phillips PM2.5×6.0 screw
1
from the front left corner of the keyboard cover.
6.
Release the ZIF connector to which the power button board cable
2
is connected and disconnect the cable from
the system board.
7. Lift and remove the keyboard cover
3
from the computer.
Reverse this procedure to install the keyboard cover.