HP Presario CQ41-100 Compaq Presario CQ41 Notebook PC - Maintenance and Servic - Page 88
Disconnect the following cables from the system board
View all HP Presario CQ41-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Removal and replacement procedures When replacing the system board, be sure that the following additional components are removed from the defective system board and installed on the replacement system board: ■ Fan/heat sink assembly (see "Fan/heat sink assembly or heat sink" on page 4-52) ■ Processor (see "Processor" on page 4-57) Remove the system board: 1. Turn the computer display-side up. 2. Position the computer with the right side toward you. 3. Disconnect the following cables from the system board: 1 Modem cable 2 Audio board cable 3 USB board cable 4 Fan cable Maintenance and Service Guide 4-49
Removal and replacement procedures
Maintenance and Service Guide
4–49
When replacing the system board, be sure that the following additional components are removed from the defective
system board and installed on the replacement system board:
■
Fan/heat sink assembly (see
“Fan/heat sink assembly or heat sink” on page 4-52
)
■
Processor (see
“Processor” on page 4-57
)
Remove the system board:
1. Turn the computer display-side up.
2. Position the computer with the right side toward you.
3. Disconnect the following cables from the system board:
1
Modem cable
2
Audio board cable
3
USB board cable
4
Fan cable