HP Presario CQ41-100 Compaq Presario CQ41 Notebook PC - Maintenance and Servic - Page 92
Loosen the four captive Phillips PM2.0×10.0 screws, that secure the fan/heat sink assembly to
View all HP Presario CQ41-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Removal and replacement procedures Remove the fan/heat sink: 1. Turn the system board upside down, with the front toward you. ✎ Steps 2 through 4 apply to computer models equipped with graphics subsystems with discrete memory. Steps 5 and 6 apply to computer models equipped with graphics subsystems with UMA memory. 2. Disconnect the fan cable 1. 3. Loosen the four captive Phillips PM2.0×10.0 screws 2 that secure the fan/heat sink assembly to the system board. 4. Remove the fan/heat sink assembly 3. ✎ Due to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board components, it may be necessary to move the fan/heat sink assembly from side to side to detach the assembly. Maintenance and Service Guide 4-53