HP Presario CQ41-100 Compaq Presario CQ41 Notebook PC - Maintenance and Servic - Page 67
Display assembly, Disconnect the wireless antenna cables from the WLAN module see
View all HP Presario CQ41-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Removal and replacement procedures Display assembly ✎ The display assembly spare part kit includes 2 WLAN antenna transceivers and cables, webcam (select models only), microphone, nameplate, and logo. Description Spare part number 14.1-in WXGA BrightView display with a microphone for models with discrete graphics subsystems 580763-001 14.1-in WXGA BrightView display with a webcam/microphone module for models with discrete graphics subsystems 580764-001 14.1-in WXGA BrightView display with a microphone module for models with UMA graphics subsystems 580765-001 14.1-in WXGA BrightView display with a webcam/microphone module for models with UMA graphics subsystems 580766-001 Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). 5. Disconnect the wireless antenna cables from the WLAN module (see "WLAN module" on page 4-14). 6. Remove the following components: a. Hard drive cover (see "Hard drive" on page 4-8) b. Mini Card compartment cover (see "RTC battery" on page 4-12) c. Optical drive (see "Optical drive" on page 4-20 d. Keyboard (see "Keyboard" on page 4-21) e. Keyboard cover (see "Keyboard cover" on page 4-24) f. Speaker assembly (see "Speaker assembly" on page 4-26) 4-28 Maintenance and Service Guide