HP Presario CQ41-100 Compaq Presario CQ41 Notebook PC - Maintenance and Servic - Page 84
Remove the Phillips PM2.5×3.0 screw, that secures the USB board to the computer.
View all HP Presario CQ41-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Removal and replacement procedures Remove the USB board and cable: 1. Turn the computer display-side up, with the right side toward you. 2. Disconnect the USB board cable 1 from the system board. 3. Remove the cable 2 from the base enclosure clips. 4. Remove the Phillips PM2.5×3.0 screw 3 that secures the USB board to the computer. 5. Lift the USB board 4 straight up to remove it from the computer. Reverse this procedure to install the USB board. Maintenance and Service Guide 4-45
Removal and replacement procedures
Maintenance and Service Guide
4–45
Remove the USB board and cable:
1. Turn the computer display-side up, with the right side toward you.
2. Disconnect the USB board cable
1
from the system board.
3. Remove the cable
2
from the base enclosure clips.
4. Remove the Phillips PM2.5×3.0 screw
3
that secures the USB board to the computer.
5. Lift the USB board
4
straight up to remove it from the computer.
Reverse this procedure to install the USB board.