HP Scitex FB550 Rigid Media Guide - Page 17

Multiple-sheet printing Figure 1: Multiple-sheet printing Multiple-sheet N-Up allows you to print more than one copy of a single job or multiple jobs on multiple sheets across the belt of either the same or different dimensions, using multiple rows of sheets until the job is complete. Use the built-in media alignment pins for quick positioning of the sheets across the printer's width. Align the left side of each sheet with one of the pins, with a small space from the right edge of the sheet to the next pin, to allow for variations in sheet dimensions. Alternatively, if you position the pins with zero clearance between the sheets and each pin, before each print be sure to raise the pins over the thickness of the sheets; otherwise the sheets could become skewed. To enable, select the N-Up Sheet Feed option when loading media and have the number of sheets you intend to print across the width of the printer in position to be loaded. Sheets must not be more than 3 inches (7.6 cm) apart from each other. Use the alignment pins if you will be printing multiple rows. Figure 2: Multiple-sheet options 14 ENWW