HP Scitex LX600 HP Scitex LX Printer Family - Site preparation guide - Page 23

Arrival preparation Shipment items All printer components will arrive in a single crate. The dimensions and weight of the crate and printer are as follows: Table 3-2 LX600 printer and crate physical specifications Length Width Height Crate 5.39 m (212.2 in) 1.73 m (68.11 in) 2.16 m (85.04 in) Printer 5.1731 m (203.66 in) 1.6440 m (64.72 in) 1.6592 m (65.32 in) Weight 1,800 kg (3,968 lb) 981 kg (2163 lb) without substrate roll Table 3-3 LX800 printer and crate physical specifications Length Width Height Crate 5.86 m (230.7 in) 1.73 m (68.11 in) 2.16 m (85.04 in) Printer 5.718 m (225.11 in) 1.6440 m (64.72 in) 1.6592 m (65.32 in) Weight 1900 kg (4189 lb) 1100 kg (2425 lb) Tools and manpower required for installation The installation process requires two capable persons, usually the installer and the operator. Check with the installation specialist before delivery to make sure you do not have to supply any tools. Moving equipment Ground floor installation CAUTION: Unloading and moving the printer and all system components is the customer's responsibility and not HP's. Failure to provide the required moving and lifting apparatus could result in personal injury or damage the printer during installation. The use of specialist moving and lifting equipment is required during the unloading, unpacking and installation of your printer. Advanced booking for the services of a machinery moving contractor/rigger must be made. It is important to confirm that the hired moving specialist and moving equipment will be available when the printer is delivered. The following equipment is recommended: ● Wide, heavy-duty forklift (required) Table 3-4 Forklift specifications Weight Fork length Distance between forks Forklift for LX600 Forklift for LX800 2721 kg (5999 lb) 3500 kg (7716 lb) 2 m (78.74 in) 2 m (78.74 in) 800 mm (31.5 in) 800 mm (31.5 in) ENWW Shipment items 19