HP StorageWorks 2/16V Brocade Fabric OS MIB Reference (53-1000241-01, November - Page 168

5 swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 Values Indicates the link state of the port. When the port's link state changes, its operational status (swFCPortOpStatus) is affected. Possible values are: • enabled (1) The port is allowed to participate in the FC-PH protocol with its attached port (or ports if it is in an FC-AL loop). • disabled (2) The port is not allowed to participate in the FC-PH protocol with its attached ports. • loopback (3) The port might transmit frames through an internal path to verify the health of the transmitter and receiver path. swFCPortTxType 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7 Values Indicates the media transmitter type of the port. Possible values are: • unknown (1) Cannot determine the port driver. • lw (2) Long wave laser. • sw (3) Short wave laser. • ld (4) Long wave LED. • cu (5) Copper (electrical). swFCPortTxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 Counts the number of Fibre Channel words that the port has transmitted. You can convert words to bytes by multiplying this value by 4. swFCPortRxWords 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12 Counts the number of Fibre Channel words that the port has received. You can convert words to bytes by multiplying this value by 4. swFCPortTxFrames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13 Counts the number of Fibre Channel frames that the port has transmitted. swFCPortRxFrames 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14 Counts the number of Fibre Channel frames that the port has received. 5-34 Fabric OS MIB Reference Publication Number: 53-1000241-01