HP StorageWorks 2/16V Brocade Fabric OS MIB Reference (53-1000241-01, November - Page 239

connUnitPortName 1.3.6.1.3.94.1.10.1.17 8 If the management station uses in-band communication (FC-IP) with the switch, either of the two following actions might result in a loss of in-band communication with the switch: • Disabling the FC port that is connected to the management station • Disabling the embedded port • Return values are: - resetConnUnitPort portDisable (F or E_Port, loop for U_Port) - bypassConnUnitPort portDisable (FL_Port) - unbypassConnUnitPort portEnable (FL_Port) - offlineConnUnitPort portDisable (E, F, FL_Port) - onlineConnUnitPort portEnable (U) - resetConnUnitPortCounters clear the port statistics counter. When rebooted, this defaults to 1 (unknown). connUnitPortName 1.3.6.1.3.94.1.10.1.17 A string describing the addressed port. This object is read-only for Brocade switches. connUnitPortPhysicalNumber 1.3.6.1.3.94.1.10.1.18 This is the internal port number by which this port is known. In many implementations, this should be the same as connUnitPortIndex. Some implementations might have an internal port representation not compatible with the rules for table indices. In these cases, provide the internal representation of this port in this object. This value might also be used in the connUnitLinkPortNumberX or connUnitLinkPortNumberY objects of the connUnitLinkTable. The internal port numbers for Brocade switch. The SilkWorm switches support 0 through maximum number of ports. The maximum number of supported ports are as follows: SilkWorm 3200, 3250 8 ports SilkWorm 4012 12 ports SilkWorm 200E, 3800, 3850 16 ports SilkWorm 3900, 4100 32 ports SilkWorm 4900 64 ports SilkWorm 7500 32 ports SilkWorm 12000 128 ports SilkWorm 24000 128 ports SilkWorm 48000 256 ports Fabric OS MIB Reference Publication Number: 53-1000241-01 8-25