HP StorageWorks 2/16V Brocade Fabric OS MIB Reference (53-1000241-01, November - Page 245

connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 8 Index connUnitLinkUnitId connUnitLinkIndex connUnitLinkUnitId 1.3.6.1.3.94.1.12.1.1 Values The connUnitId of the connectivity unit that contains this link table. Set to WWN of the local switch. connUnitLinkIndex 1.3.6.1.3.94.1.12.1.2 This value is used to create a unique value for each entry in the link table with the same connUnitLinkUnitId. The value can only be reused if it is not currently in use and the value is the next candidate to be used. This value is allowed to wrap at the highest value represented by the number of bits. This value is reset to 0 when the system is reset and the first value to be used is 1. Indexes 1 through maximum number of ports is reserved for ISL. Indexes maximum number of ports + 1 and above are reserved for end devices and are calculated based on portID of the end device(s). connUnitLinkNodeIdX 1.3.6.1.3.94.1.12.1.3 The node WWN of the unit at one end of the link. If the node WWN is unknown and the node is a connUnit in the responding agent, then the value of this object must be equal to its connUnitID. WWN of the local switch. connUnitLinkPortNumberX 1.3.6.1.3.94.1.12.1.4 The port number on the unit specified by connUnitLinkNodeIdX, if known; otherwise, -1. If the value is nonnegative, then it is equal to connUnitPortPhysicalNumber. ISL: Physical port number of the E_Port. Device: Physical port # to which the device is connected. connUnitLinkPortWwnX 1.3.6.1.3.94.1.12.1.5 The port WWN of the unit specified by connUnitLinkNodeIdX, if known; otherwise, 16 octets of binary 0. This is the WWN of the port to which the device is connected. connUnitLinkNodeIdY 1.3.6.1.3.94.1.12.1.6 The node WWN of the unit at the other end of the link. If the node WWN is unknown and the node is a connUnit in the responding SNMP agency, then the value of this object must be equal to its connUnitID. Fabric OS MIB Reference Publication Number: 53-1000241-01 8-31