HP StorageWorks 2/16V Brocade Fabric OS MIB Reference (53-1000241-01, November - Page 235

connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5 8 connUnitPortFCClassOp 1.3.6.1.3.94.1.10.1.5 Bit mask that specifies the classes of service that are currently operational. If this is not applicable, return all bits set to 0. This object has the same definition as connUnitPortFCClassCap. For an F_Port or FL_Port, this value is 0x000C. For a G_Port or E_Port, this value is 0x000D. connUnitPortState 1.3.6.1.3.94.1.10.1.6 Values The state of the port hardware. Possible values are: • unavailable (1) Do not use. • online (2) Available for meaningful work. • offline (3) Not available for meaningful work. • bypassed (4) No longer used. • diagnostics (5) Map to your testing. (Not supported in Fabric OS v2.6.1.) For an E, F, or FL_Port, the value is online. For a U_Port, the value is offline (disabled, testing, faulted). connUnitPortStatus 1.3.6.1.3.94.1.10.1.7 Values An overall protocol status for the port. For a U_Port, the status should be ols (9). Possible values are: • unknown (1) • unused (2) Device cannot report this status. • ready (3) FCAL Loop or FCPH Link reset protocol initialization has completed. • warning (4) Do not use. • failure (5) Port is faulty. • notparticipating (6) Loop not participating and does not have a loop address. Do not use. • initializing (7) Protocol is proceeding. Do not use. • bypass (8) Do not use. • ols (9) FCP offline status. (Not supported in Fabric OS v2.6.1.) Note In FOS v2.6.x, for an E_Port, F_Port, or FL_Port, the value is 3 (ok). For a U_Port, the value is 2 (unused) if not faulty with GBIC, 1(unknown) if not faulty but no GBIC, or 5 (failure) if faulty. In FOS v3.x and above, for an E_Port, F_Port, FL_Port or other Port and online port state, the value is 3 (ok). For G_Port or other Port and offline port state, the value is 9 (ols). For unknown portype and offline port state, the value is 1 (unknown). Fabric OS MIB Reference Publication Number: 53-1000241-01 8-21