HP StorageWorks 2/16V Brocade Fabric OS MIB Reference (53-1000241-01, November - Page 25

Loading Brocade MIBs 1 MIB Loading Order Many MIBs use definitions that are defined in other MIBs. These definitions are listed in the IMPORTS section near the top of the MIB. When loading the Brocade MIBs, see Figure 1-6 to ensure any MIB dependencies are loading in the correct order. RFC1213-MIB MIB-II RFC1155-SMI Select one FA_v2_2.mib FCMGMT-MIB FOS 2.6.x FA_v3_0.mib FCMGMT-MIB FOS 3.x, 4.x, 5.x Select one or both FE_EXP.mib FCFABRIC-ELEMENT-MIB FOS v2.6.x, v3.0.x FE_RFC2837.mib FIBRE-CHANNEL-FE-MIB FOS 3.1.x, 4.x, 5.x SNMPv2-SMI BRCD_v5_0.mib Brocade-REG-MIB Brocade-TC FOS 2.6.x, 3.x, 4.x, 5.x FICON_v5_0.mib FICON-MIB FOS 4.x, 5.x SMNPv2-TC snmpUsmMIB User-based Security Model FOS 4.4 and 5.x SW_v5_5.mib FOS 2.6.x, 3.x, 4.x, 5.x SNMPv2-CONF RFC2571 SNMP-FRAMEWORK-MIB ENTITY_RFC2737.mib ENTITY-MIB FOS 4.x, 5.x Legend Standard MIB File Module name Dependency HA_v5_1.mib HA-MIB FOS 4.x, v5.x Brocade MIB Module name FOS supported Note: FA_v3_0.mib obsoletes the use of the connUnitPortStatFabricTable used in the FA_v2_2.mib. FA_v3_0.mib now uses the connUnitPortStatTable for port statistics. The FA_v3_0.mib and the FA_v2_2.mib cannot be loaded concurrently on the same SNMP management system. The FE_RFC2837.mib and the FE_EXP.mib can be loaded concurrently on the same SNMP management system. The FE_EXP.mib was listed in the experimental OID section. The FE_RFC2837.mib has subsequently been ratified by the standards organizations.| All versions of Fabric OS support SNMPv1. Fabric v2.6.x and v3.2.x partially support SNMPv2. Fabric OS v4.4.0 and v5.0.1 support SNMPv3-USM (snmpUsmMIB) MIB. Figure 1-6 Brocade SNMP MIB Dependencies and Advised Installation Order Fabric OS MIB Reference 1-7 Publication Number: 53-1000241-01