HP StorageWorks 4000 Compaq RAID Array 4000 Overview - Page 8
In the Fibre Channel Host Adapter connects to a Storage Hub 7. The Storage Hub 7
 |
View all HP StorageWorks 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Compaq RAID Array 4000 Overview 8 In Figure 1, the Fibre Channel Host Adapter connects to a Storage Hub 7. The Storage Hub 7 connects to the RA4000. GBICs are installed at all fiber interconnections. Figure 1. Single controller configuration Additional RA4000s can be added simply by connecting them to the hub while the loop is not active. The added RA4000 can then be configured using the Array Configuration Utility7. Figure 2 shows that using redundant host adapters, Storage Hubs, and RA4000 Redundant Controllers, an NSPOF configuration can be deployed. Figure 2. Redundant controllers configuration 7 Refer to Array Configuration Utility later in this document. ECG0205699A
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
 |
 |
Compaq RAID Array 4000 Overview
8
ECG0205699A
In Figure 1, the Fibre Channel Host Adapter connects to a Storage Hub 7. The Storage Hub 7
connects to the RA4000. GBICs are installed at all fiber interconnections.
Figure 1. Single controller configuration
Additional RA4000s can be added simply by connecting them to the hub while the loop is not
active. The added RA4000 can then be configured using the Array Configuration Utility
7
.
Figure 2 shows that using redundant host adapters, Storage Hubs, and RA4000 Redundant
Controllers, an NSPOF configuration can be deployed.
Figure 2. Redundant controllers configuration
7
Refer to Array Configuration Utility later in this document.