HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.1b release notes (5697-7838 - Page 25

The aaaconfig command online help text needs to be corrected to clearly indicate LDAP cannot be configured while FIPS is enabled. Fixed in Fabric OS 6.1.1. FR-18i faulted after overnight stress testing. Fixed in Fabric OS 6.1.1. A TI zone with an invalid (too high) port number can cause a kernel panic. Fixed in Fabric OS 6.1.1. ARRd Daemon had multiple restarts that ultimately let to a KSWD event. Fixed in Fabric OS 6.1.1. Fast Write can obtain incorrect FCP command data length if the optional additional CDB length is selected. Fixed in Fabric OS 6.1.1. Hardware LED shows error status (flashing amber or green), even though all FRUs are okay. Fixed in Fabric OS 6.1.1. Invalid Tx/Rx rate can be computed if a polling cycle takes place when a domain name has not been assigned. Fixed in Fabric OS 6.1.1. An EZ Switch Manager validation error occurs on existing zones due to devices of type initiator+target or unknown being treated like storage. Fixed in Fabric OS 6.1.1. The Accept CT_IU to GA_NXT Request frame is being rejected by a third-party storage device because the frame size is 680 bytes. Fixed in Fabric OS 6.1.1. HP 8/80 FRU faulty status not recovered after connecting to correct power supply after operating with a single power supply. Fixed in Fabric OS 6.1.1. A Tape Selective Reset error occurs due to incorrect handling of Early End Synchronization status. Fixed in Fabric OS 6.1.1. A FICON Device Level Ack Emulation Processing error occurred. Fixed in Fabric OS 6.1.1. HP StorageWorks Fabric OS 6.1.1b release notes 25