HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.1.1b release notes (5697-7838 - Page 26

Fabric OS 6.1.1a fixes, Table 11 - san switch firmware

Page 26 highlights

Fabric OS 6.1.1a fixes Table 11 lists defects closed in the Fabric OS 6.1.1a firmware release. Table 11 Fabric OS 6.1.1a closed defects Closed defect summary Solution The tag field of the node identifier command returned, contains the port number on which the command was received, instead of the tag field of the device on the other end of the link. Fixed in Fabric OS 6.1.1a. After systemverification -short is completed on the HP 8/80 SAN Switch, the route is affected on platforms with BI ports. Fixed in Fabric OS 6.1.1a. Third-party application paths fail with FC Fast Write enabled with bidirectional traffic due to out of order or dropped frames. Fixed in Fabric OS 6.1.1a. Speed negotiation fails on some 4-Gb Quad-Rate, long-wave, 4-km SFPs. Fixed in Fabric OS 6.1.1a. Java is running out of memory in Web Tool,s causing sluggish response. Fixed in Fabric OS 6.1.1a. On a backbone switch with both EX and VE ports or VEX ports, after hafailover and hareboot, the device on the backbone has no access to the remote device. Fixed in Fabric OS 6.1.1a. Need better response message from CAL when the setting of SCC policy fails. Fixed in Fabric OS 6.1.1a. When transient failure occurs at the same time as core blade plug insertion, frames could be dropped in the switch, leading to SCSI timeouts Fixed in Fabric OS 6.1.1a. and errors. Fabric OS 6.1.1b fixes Table 12 lists defects closed in the Fabric OS 6.1.1b firmware release. Table 12 Fabric OS 6.1.1b closed defects Closed defect summary Solution audicfg is not persistent through hareboot. Fixed in Fabric OS 6.1.1b. HP 4/32B SAN Switch experienced an out-of-memory condition operating in a fabric with an McDATA 2640 SAN router. Fixed in Fabric OS 6.1.1b CRC errors were seen on trunk ports between an HP 8/40 and 8/80 switch with a particular SFP type. Fixed in Fabric OS 6.1.1b GNN_ID query for self NWWN from target results in failure due to frame reduction logic, causing the Target Port Link to go down, leading Fixed in Fabric OS 6.1.1b to discovery failures from the host. A Java out-of-memory conditio occurs after Web Tools session expired. Fixed in Fabric OS 6.1.1b 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

Fabric OS 6.1.1a fixes
Table 11
lists defects closed in the Fabric OS 6.1.1a firmware release.
Table 11 Fabric OS 6.1.1a closed defects
Solution
Closed defect summary
Fixed in Fabric OS 6.1.1a.
The tag field of the node identifier command returned, contains the
port number on which the command was received, instead of the tag
field of the device on the other end of the link.
Fixed in Fabric OS 6.1.1a.
After
systemverification —short
is completed on the HP 8/80
SAN Switch, the route is affected on platforms with BI ports.
Fixed in Fabric OS 6.1.1a.
Third-party application paths fail with FC Fast Write enabled with bid-
irectional traffic due to out of order or dropped frames.
Fixed in Fabric OS 6.1.1a.
Speed negotiation fails on some 4-Gb Quad-Rate, long-wave, 4-km
SFPs.
Fixed in Fabric OS 6.1.1a.
Java is running out of memory in Web Tool,s causing sluggish re-
sponse.
Fixed in Fabric OS 6.1.1a.
On a backbone switch with both EX and VE ports or VEX ports, after
hafailover
and
hareboot
, the device on the backbone has no
access to the remote device.
Fixed in Fabric OS 6.1.1a.
Need better response message from CAL when the setting of SCC
policy fails.
Fixed in Fabric OS 6.1.1a.
When transient failure occurs at the same time as core blade plug in-
sertion, frames could be dropped in the switch, leading to SCSI timeouts
and errors.
Fabric OS 6.1.1b fixes
Table 12
lists defects closed in the Fabric OS 6.1.1b firmware release.
Table 12 Fabric OS 6.1.1b closed defects
Solution
Closed defect summary
Fixed in Fabric OS 6.1.1b.
audicfg
is not persistent through
hareboot
.
Fixed in Fabric OS 6.1.1b
HP 4/32B SAN Switch experienced an out-of-memory condition oper-
ating in a fabric with an McDATA 2640 SAN router.
Fixed in Fabric OS 6.1.1b
CRC errors were seen on trunk ports between an HP 8/40 and 8/80
switch with a particular SFP type.
Fixed in Fabric OS 6.1.1b
GNN_ID query for self NWWN from target results in failure due to
frame reduction logic, causing the Target Port Link to go down, leading
to discovery failures from the host.
Fixed in Fabric OS 6.1.1b
A Java out-of-memory conditio occurs after Web Tools session expired.
26