HP StorageWorks MSA 2/8 SCO Operating System support of HP StorageWorks Modula - Page 18

Limitations, The intended Controller C, Bus B, Target T and disk D parameters need

Get HP StorageWorks MSA 2/8 - SAN Switch PDF manuals and user guides View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

layout of slices (either through a set of defaults or by asking for details), writing the pdinfo, VTOC and alternates tables out to the drive, issuing needed mkfs calls, creating mount points, mounting filesystems, and updating the /etc/vfstab file. Typical usage of this command is: # disksetup -Ie /dev/rdsk/cCbBtTdDs0 The intended Controller (C), Bus (B), Target (T) and disk (D) parameters need to be specified appropriately with this command. Using SCO OpenServer 6.0.0 "mkdev hd", one can create filesystems on MSA1000/MSA1500 LUNs. "mkdev hd" presents a list of disks identified on the system running SCO OpenServer 6.0.0. Select the disk to configure and follow the prompts. "mkdev hd" process takes you through "fdisk" program to create partitions on the selected disk and "divvy" program to create slices and filesystems on the selected disk. Limitations UnixWare 7/OpenServer 6 1. Maximum of two (2) servers per cluster 2. MSA1000 Redundancy 3. MSA1000 Multi-path 4. Online configuration of MSA1000/MSA1500 LUNs 5. Online Firmware upgrade of MSA1000/MSA1500 6. Event logging of MSA1000/MSA1500 7. Systems Management support for MSA1000/MSA1500 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
18
layout of slices (either through a set of defaults or by asking for details),
writing the pdinfo, VTOC and alternates tables out to the drive, issuing
needed
mkfs
calls, creating mount points, mounting filesystems, and updating
the /etc/vfstab file. Typical usage of this command is:
# disksetup –Ie /dev/rdsk/cCbBtTdDs0
The intended Controller (C), Bus (B), Target (T) and disk (D) parameters need
to be specified appropriately with this command.
Using SCO OpenServer 6.0.0
“mkdev hd”
, one can create filesystems on
MSA1000/MSA1500 LUNs.
“mkdev hd”
presents a list of disks identified on
the system running SCO OpenServer 6.0.0. Select the disk to configure and
follow the prompts.
“mkdev hd”
process takes you through
“fdisk”
program to
create partitions on the selected disk and
“divvy”
program to create slices
and filesystems on the selected disk.
Limitations
UnixWare 7/OpenServer 6
1.
Maximum of two (2) servers per cluster
2.
MSA1000 Redundancy
3.
MSA1000 Multi-path
4.
Online configuration of MSA1000/MSA1500 LUNs
5.
Online Firmware upgrade of MSA1000/MSA1500
6.
Event logging of MSA1000/MSA1500
7.
Systems Management support for MSA1000/MSA1500