HP StorageWorks MSA 2/8 HP StorageWorks Extended Fabric V3.1.x/4.1.x User Guid - Page 17
Activating the License Using Telnet, The license key is case-sensitive.
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installing Extended Fabric Activating the License Using Telnet Activate licenses using the licenseadd command. To activate an Extended Fabrics license using the CLI: 1. Open a telnet or serial connection to the switch. 2. Log into the switch as Admin. The default password is "password". 3. Contact the switch supplier for an Extended Fabrics license key. 4. Enter the following: licenseadd "key" where "key" is the license key exactly as provided by the switch supplier. The license key is case-sensitive. switch:admin> licenseadd "aAaaaaAaAaAaAaA" adding license key "aAaaaaAaAaAaAaA" done. switch:admin> 5. Verify that the license was added by entering the licenseshow command, as described in "Verifying Activated Licenses" on page 14. Extended Fabric Version 3.1.x/4.1.x User Guide 17