HP Vectra XA 5/xxx HP Vectra xA 5/XXX Series 5 /vl 5/xxx series 5 pc Technical - Page 16
System Overview, Parameter, Limit for the Power, Supply, Notes, Limit per PCI, Accessory, Limit per
View all HP Vectra XA 5/xxx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
1 System Overview Specifications and Characteristic Data For the minitower models: Parameter Limit for the Power Supply Notes Limit per PCI Accessory Slot Limit per ISA Accessory Slot Input voltage 100-127 200-240 Switch selectable Vac Vac Input voltage range 90-140 180-264 Vac Vac Input current (max) 5 A 3 A Input power (max) Input power (typical1) 200 W < 44 W < 29 W < 24 W < 5 W Fully-on mode - Standby mode Suspend mode Off (but plugged) Input frequency 45 Hz to 66 Hz Available power 160 W (continuous) 25 W (max) Max current at +5 V 20 A Max current at +3.3 V 12 A Together, these 4.5 A two must not exceed 20 A - Max current at -5 V 0.2 A - - Max current at +12 V 4.4 A - 1.5 A Max current at -12 V 0.5 A - 0.1 A Max current at +5 Vst 0.05 A - - 1.Dependant on operating system and PC configuration - 7 W (max) 4.5 A - 0.1 A 0.5 A 0.3 A - When the computer is turned off, but left plugged in at the mains, the power consumption falls below 5 watts, but is not zero. A small trickle current continues to flow, supplying power to the CMOS memory, considerably extending the lifetime of the on-board battery. If the computer is completely unplugged from the mains, the real time clock continues to operate, from the charge stored in the battery. 16