HP Visualize J5000 hp Visualize J5000 to J5600 workstation PA8600 upgrade inst - Page 24

System Board Removal/Replacement Reinserting the Memory Card(s) (DIMMs) Reinserting the Memory Card(s) (DIMMs) 1. Refer to the label in the system for correct installation sequence. 2. Make sure the ejector tabs are angled outward. Next, align the notched edge of the memory card with its slot. Insert the memory card and firmly and evenly push down on each side to lock it into place. the ejector tabs will angle upward as the memory card is inserted. 3. Make sure the ejector tabs are angled outward. Next, align the notched edge of the memory card with its slot. Insert the memory card and firmly and evenly push down on each side to lock it into place. the ejector tabs will angle upward as the memory card is inserted. 4. Visually inspect and confirm the connection between the memory card and the system board. 5. Repeat steps 1 and 2 for all memory cards. 24 Chapter 2