HP t200 HP Compaq MultiSeat ms6200 Desktop Hardware Reference Guide - Page 15
Removing the Computer Access Panel
View all HP t200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Removing the Computer Access Panel To access internal components, you must remove the access panel: 1. Remove/disengage any security devices that prohibit opening the computer. 2. Remove all removable media, such as compact discs or USB flash drives, from the computer. 3. Turn off the computer properly through the operating system, then turn off any external devices. 4. Disconnect the power cord from the power outlet and disconnect any external devices. CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. 5. If the computer is on a stand, remove the computer from the stand and lay the computer down. 6. Lift up on the access panel handle (1) then lift the access panel off the computer (2). Figure 2-1 Removing the Computer Access Panel Removing the Computer Access Panel 9