HP t200 HP Compaq MultiSeat ms6200 Desktop Hardware Reference Guide - Page 27
Removing an Expansion Slot Cover,
View all HP t200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
9. Before installing an expansion card, remove the expansion slot cover or the existing expansion card. NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card. a. If you are installing an expansion card in a vacant socket, remove the appropriate expansion slot cover on the back of the chassis. Pull the slot cover straight up then away from the inside of the chassis. Figure 2-11 Removing an Expansion Slot Cover Removing or Installing an Expansion Card 21
9.
Before installing an expansion card, remove the expansion slot cover or the existing expansion
card.
NOTE:
Before removing an installed expansion card, disconnect any cables that may be
attached to the expansion card.
a.
If you are installing an expansion card in a vacant socket, remove the appropriate expansion
slot cover on the back of the chassis. Pull the slot cover straight up then away from the inside
of the chassis.
Figure 2-11
Removing an Expansion Slot Cover
Removing or Installing an Expansion Card
21