HP t200 HP Compaq MultiSeat ms6200 Desktop Hardware Reference Guide - Page 41
Connecting the Secondary Hard Drive Power Cable and Data Cable
View all HP t200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
5. Connect the appropriate drive cables: a. If installing a second hard drive, connect the power cable (1) and data cable (2) to the rear of the drive and connect the other end of the data cable to the white connector on the system board labeled SATA1. Figure 2-31 Connecting the Secondary Hard Drive Power Cable and Data Cable b. If installing a media card reader, connect the USB cable from the media card reader to the USB connector on the system board labeled MEDIA. Figure 2-32 Connecting the Media Card Reader USB Cable NOTE: Refer to System Board Connections on page 14 for an illustration of the system board drive connectors. 6. Replace the 5.25-inch drive. 7. Replace the front bezel (if removed) and access panel. 8. If the computer was on a stand, replace the stand. Installing and Removing Drives 35