Home » HP Manuals » Desktops » HP t200 » Manual Viewer

HP t200 HP Compaq MultiSeat ms6200 Desktop Hardware Reference Guide - Page 28

Removing a PCI Express x16 Expansion Card, Removing a Standard PCI Expansion Card

Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

b. If you are removing a standard PCI card or PCI Express x1 card, hold the card at each end, and carefully rock it back and forth until the connectors pull free from the socket. Pull the expansion card straight up from the socket (1) then away from the inside of the chassis to release it from the chassis frame (2). Be sure not to scrape the card against the other components. Figure 2-12 Removing a Standard PCI Expansion Card c. If you are removing a PCI Express x16 card, pull the retention arm on the back of the expansion socket away from the card and carefully rock the card back and forth until the connectors pull free from the socket. Pull the expansion card straight up from the socket then away from the inside of the chassis to release it from the chassis frame. Be sure not to scrape the card against the other components. Figure 2-13 Removing a PCI Express x16 Expansion Card 10. Store the removed card in anti-static packaging. 22 Chapter 2 Hardware Upgrades

Section	Page
Product Features	7
Standard Configuration Features	7
Front Panel Components	8
Media Card Reader Components	8
Rear Panel Components	10
Keyboard	11
Using the Windows Logo Key	12
Serial Number Location	13
Hardware Upgrades	14
Serviceability Features	14
Warnings and Cautions	14
Removing the Computer Access Panel	15
Replacing the Computer Access Panel	16
Removing the Front Bezel	17
Removing Bezel Blanks	17
Replacing the Front Bezel	18
Changing from Desktop to Tower Configuration	19
System Board Connections	20
Installing Additional Memory	21
DIMMs	21
DDR3-SDRAM DIMMs	21
Populating DIMM Sockets	22
Installing DIMMs	23
Removing or Installing an Expansion Card	26
Drive Positions	30
Installing and Removing Drives	31
Removing a 5.25-inch Drive from a Drive Bay	33
Installing a 5.25-inch Drive into a Drive Bay	35
Removing a 3.5-inch Drive from a Drive Bay	38
Installing a 3.5-inch Drive into a Drive Bay	40
Removing and Replacing the Primary 3.5-inch Internal Hard Drive	42
Specifications	46
Battery Replacement	48
Installing a Security Lock	51
HP/Kensington MicroSaver Security Cable Lock	51
Padlock	52
HP Business PC Security Lock	53
Front Bezel Security	57
Electrostatic Discharge	59
Preventing Electrostatic Damage	59
Grounding Methods	59
Computer Operating Guidelines, Routine Care and Shipping Preparation	60
Computer Operating Guidelines and Routine Care	60
Optical Drive Precautions	61
Operation	61
Cleaning	61
Safety	61
Shipping Preparation	61

Match case Limit results 1 per page

If you are removing a standard PCI card or PCI Express x1 card, hold the card at each end,

and carefully rock it back and forth until the connectors pull free from the socket. Pull the

expansion card straight up from the socket (1) then away from the inside of the chassis to

release it from the chassis frame (2). Be sure not to scrape the card against the other

components.

Figure 2-12

Removing a Standard PCI Expansion Card

If you are removing a PCI Express x16 card, pull the retention arm on the back of the

expansion socket away from the card and carefully rock the card back and forth until the

connectors pull free from the socket. Pull the expansion card straight up from the socket then

away from the inside of the chassis to release it from the chassis frame. Be sure not to scrape

the card against the other components.

Figure 2-13

Removing a PCI Express x16 Expansion Card

10.

Store the removed card in anti-static packaging.

Chapter 2

Hardware Upgrades