HP vp6300 HP vp6300 Series Digital Projector - User's Guide - Page 45

Plug in the lamp connector. - lamp module

Get HP vp6300 - Digital Projector PDF manuals and user guides View all HP vp6300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

5. Loosen the two screws 4 on the lamp module, and pull out the module 5. 6. Insert the new lamp module into the projector and tighten the two screws. 7. Plug in the lamp connector. 8. Snap the lamp cover into place. 9. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp. 10.Press enter, go to Setup > Advanced setup > Reset lamp hours, and press enter. Performing routine maintenance 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Performing routine maintenance
45
5.
Loosen the two screws
4
on the lamp module, and pull out the module
5
.
6.
Insert the new lamp module into the projector and tighten the two screws.
7.
Plug in the lamp connector.
8.
Snap the lamp cover into place.
9.
Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling
the lamp.
10.
Press
enter,
go to
Setup > Advanced setup > Reset lamp hours,
and press
enter.