Hitachi DK23DA-30F Owners Manual - Page 42
Removable Media Status Notification feature set enabled
View all Hitachi DK23DA-30F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Word Table 6.5 Identify Device Information (Continued) Description 86 Command set/feature enabled 0000h or FFFFh = Command set notification not supported Bit 15 -14 0 = Reserved Bit 13 1 = Flush cache EXT command supported Bit 12 1 = Flush Cache command supported Bit 11 1 = Device Configuration Overlay supported Bit 10 1 = 48-bit Address features set supported Bit 9 1 = Automatic Acoustic Management feature set enabled Bit 8 1 = SET MAX security extension enabled by SET MAX PASSWORD Bit 7 1 = Address offset mode feature enabled Bit 6 1 = SET FEATURES subcommand required to spin-up after power- up Bit 5 1 = Power-up in standby feature set enabled Bit 4 1 = Removable Media Status Notification feature set enabled Bit 3 1 = Advanced Power Management feature set enabled Bit 2 1 = CFA feature set supported Bit 1 1 = READ/WRITE DMA QUEUED supported Bit 0 1 = DOWNLOAD MICROCODE command supported 87 Command set/feature default 0000h or FFFFh = Command set notification not supported Bit 15 0 (fixed) Bit 14 1 (fixed) Bit 13 - 2 0 = Reserved Bit 1 1 = SMART self-test supported Bit 0 1 = SMART error logging supported 88 Ultra DMA transfer Bit 15 - 14 0 = Reserved Bit 13 0 = Ultra DMA mode 5 is selected Bit 12 0 = Ultra DMA mode 4 is selected Bit 11 0 = Ultra DMA mode 3 is selected Bit 10 0 = Ultra DMA mode 2 is selected Bit 9 0 = Ultra DMA mode 1 is selected Bit 8 0 = Ultra DMA mode 0 is selected Bit 7 - 6 0 = Reserved Bit 5 0 = Ultra DMA mode 5 and below are supported Bit 4 0 = Ultra DMA mode 4 and below are supported Bit 3 0 = Ultra DMA mode 3 and below are supported Bit 2 0 = Ultra DMA mode 2 and below are supported Bit 1 0 = Ultra DMA mode 1 and below are supported Bit 0 0 = Ultra DMA mode 0 and below are supported 89 Time required for security erase unit completion Word 89 specifies the time required for the SECURITY ERASE UNIT command to completion. If word 90 is 0000h, the time is not specified. SECURITY ERASE UNIT completion time = value x 2[minutes] 90 Time required for enhanced security erase unit completion Word 90 specifies the time required for the ENHANCED SECURITY ERASE UNIT command to completion. ENHANCED SECURITY ERASE UNIT completion time = value x 2[minutes]. If Word 90 is 0000h, the time is not specified. K6602705 Rev.3 08.20.01 - 42 - Value (HEX.) 1808h 4003h XX3Fh 00XXh 00XXh