Hitachi DV-PF33U Owners Guide - Page 23
Playing A Disc
View all Hitachi DV-PF33U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
English H9450UD(EN).qx33 03.1.22 7:19 PM Page 23 AUTO REWIND REAL TIME TAPE COUNTER When a tape reaches the end during recording, playback, or fast-forward, the tape will automatically rewind to the beginning. After rewinding finishes, the DVD/VCR will eject the tape and switch itself off. ¡The DVD/VCR will not rewind the tape automatically during timer recording or Instant Recording Timer. ¡This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change during blank portions of the tape. The front display of DVD/VCR will show in hour, minute only.) ¡The indication will appear when the tape is rewound further than "0:00:00" on the tape counter. PLAYING A DISC BASIC PLAYBACK DVD CD Getting started ¡Turn on the power of the TV, amplifier and any other components which are connected to the DVD/VCR. ¡Make sure the TV and audio receiver (commercially available) are set to the correct channel. ¡Select DVD mode by pressing DVD on the remote control or output on the front panel. 1 Press y/I. ¡"Load" will appear briefly on the display panel. ¡Check that the DVD OUTPUT Light is lit. If not, press the DVD button on the Remote control to switch to DVD mode. Notes ¡A "prohibited icon" may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD/VCR or the disc. ¡With DVDs that use titles for playback program signals, playback may start from the second title, or it may skip these titles. ¡During the playback of a two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction. ¡If a disc is dirty or has scratches, the pictures may appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback. GENERAL FEATURES 2 Press OPEN/CLOSE to open disc loading tray. 3 Place the chosen disc in the tray, with the label facing up. DVD may contain menus to navigate the disc and access special features. Press appropriate numerical button or use Arrow (L/K/B/s) to highlight your selection in the DVD main menu and press ENTER to confirm. Note ¡Unless stated, all operations described are based on remote control use. Some operations can be carried out using the menu bar on the TV screen. 4 Press PLAY. ¡The tray will close automatically, and playback will then start from the first chapter or track of the disc. If the playback does not start automatically, press PLAY. ¡When you playback the DVD which a title menu is recorded, it may appear on the screen. In this case, refer to "TITLE MENU" on page 24. PAUSE DVD CD 1 During playback, press PAUSE/STEP. ¡Playback will pause and sound will be muted. 2 To continue playback, press PLAY. 5 Press STOP to stop playback. - 23 - EN 1L25