Hitachi DZ-GX20A Owners Guide - Page 116

CHANGING IMAGES FOR THUMBNAILS (EFFECT - THUMBNAIL) 1 Normally, the first image of the recorded scene is displayed as a thumbnail: You can choose another image of the scene for thumbnail. If you set a vivid image to thumbnail, you can know what you recorded from a glance at the Disc Navigation screen. Original thumbnail You can use this image as thumbnail. ● ● ● ● ● ● 1 Press the DISC NAVIGATION button. 2 Select the thumbnail of the scene to be changed. 3 Press the MENU button. 4 Choose "Scene", "Effect", "Thumbnail", and then press the A button. Scene Ed i t E f f ec t Fade Copy Sk i p Se l e c t T h umbna i l Det a i l ETC ENTER RETURN RAM 5 The "Change Thumbnail" screen will Se l e c t Thumb na i l Po i n t appear: If you are sure you want to change the thumbnail of the selected scene, press the SEL ENTER CANCEL A button: The selected scene will be played back. If you want to change the scene whose thumbnail is to be changed, you can change it on this screen. 6 When the image you want to use as the thumbnail of the scene appears, press the SELECT button. 7 The screen for verifying switching of thumbnail will appear: Choose "YES", and then press the A button. Change Thumbna i l Change thumbna i l ? YES NO ENTER Choose "NO" to cancel switching of thumbnail. After Yes or No setting, the "Change Thumbnail" screen will be restored. Repeat steps 5 - 7 to change the other scenes. 8 Press the C button to quit. Note: • If you press the MENU button before pressing the A button in step 5, the submenu screen will appear. (See page 111) • A thumbnail of still cannot be changed. • Since the scene to which skipping is set cannot be played back, you will not be able to change its thumbnail: Release the skip setting of the scene to change the thumbnail. English 116