Hitachi DZ-GX20A Owners Guide - Page 158
No DVD Video Camera/Recorder Operation, Check the Following
UPC - 050585223509
View all Hitachi DZ-GX20A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
No DVD Video Camera/Recorder Operation - Check the Following: Check 1 No movie can be recorded Movie can be recorded only on DVD-RAM or DVDR disc. Check the following: • Is proper type of disc inserted? • Is power switch set to "O"? • Is the DVD-RAM disc in DVD video camera/ recorder write-protected? Release the writeprotect. • When using DVD-R disc: Has the disc been finalized? • Does disc have remaining recording space? If movie still cannot be recorded after the above check is clear, the disc may be damaged: Use another disc. Check 2 No still can be recorded Still can be recorded only on DVD-RAM disc or SD memory card. Check the following: • Is proper type of disc or card inserted? • Is power switch set to match the recording medium? − When using DVD-RAM disc: Set to "N". If the LOCK switch on this DVD video camera/ recorder is set to L (upper position), set it to K (lower position). If the LOCK switch is set to L (upper position), switching to "N" is not possible. − When using SD memory card: Set to "P". • Is loaded DVD-RAM disc write-protected? • When using SD memory card: Is the erase prevention switch locked? (p. 27) • Does disc or card have remaining recording space? If still cannot be recorded after the above check is clear, the disc or card may be damaged: Use another disc or card. Check 3 Skip or search playback does not work well If the temperature inside the DVD video camera/ recorder is high, normal operation may not be possible. Turn the DVD video camera/recorder off, wait for a few moments, and then turn it on again for operation. Check 4 • No operation can be performed because the ACCESS/PC or CARD ACCESS indicator on this DVD video camera/recorder remains lit or blinking. • After disc or card is inserted, it takes some time until recording is possible. In the following cases, it will take more time than usual until operation is possible: • Immediately after a disc or card is reinserted. • When a long time has elapsed since the DVD video camera/recorder was turned off last. • When the temperature is greatly different from the status of previous recording. • When disc with scratches, dirt or fingerprints is inserted. • When disc is subject to severe vibrations. • When the battery or DC power cord was disconnected instead of following the correct procedure using power switch to turn the DVD video camera/recorder off. English 158