Hitachi DZ-GX20A Owners Guide - Page 154
Changing Setting of Demonstration
UPC - 050585223509
View all Hitachi DZ-GX20A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Changing Setting of Demonstration This DVD video camera/recorder is equipped with a demonstration function. The default at purchase time is "Auto", which will automatically start the demonstration approx. three minutes after the DVD video camera/recorder is turned on. Use the following procedure if you wish to view the demonstration immediately or change the setting to "Off". 1 Press the MENU button. 2 Choose "Initial Setup", "Demo Mode", and then press the A button. 3 Press the f or e Ini t i al Setup Beep Power Save Record LED Language Demo Mode Reset ENTER RETURN Auto Off Start RAM button to choose the desired option, and then press the A button. Note: • You can press the DISC NAVIGATION button to stop demonstration midway: The Disc Navigation screen will appear. • If you choose "Auto", the demonstration will not start if a disc is loaded with the power switch set to "O" or "N", or a card is loaded with the power switch set to " P". • The demonstration function will not work when the DVD video camera/recorder is connected to PC (for DZ-GX20A or DZ-MV780A only). • While the demonstration is being given, the recording indicator will blink. Auto: To start demonstration approx. 3 minutes after turning the DVD video camera/recorder on. Off: To set demonstration to off. Start: To start demonstration immediately. Press the MENU button again: The menu screen will disappear. To stop the demonstration midway, press the C button. The demo mode will end when the DVD video camera/recorder is turned off or the DISC EJECT button is pressed down. English 154