Hitachi DZ-GX20A Owners Guide - Page 45

Inserting and Removing Disc INSERTING DISC 1 Press down the DISC EJECT button once and release it. A few moments after the ACCESS/PC indicator blinks, the cover of disc insertion block will open. 2 Gently open the cover by hand fully until it stops. 3 Push the disc against the turntable at the center to lock it until a click is heard. Turntable 4 Push the section marked "PUSH CLOSE" on the cover of disc insertion block, to close the cover. Then the DVD video camera/recorder will automatically recognize the disc: While the ACCESS/PC indicator is lit, do not cut off the power supply, and do not subject the DVD video camera/recorder to any vibrations or impact. ●Identifying recording sides of disc: Single sided disc: "SIDE A" mark The recording side is opposite to the printed label. Double-sided disc: DVD-RAM / SIDE A The recording side of "SIDE A" is opposite to the "SIDE A" marked side. The recording side of "SIDE B" is the "SIDE A" marked side. The opposite side is the "SIDE A" recording side. Push the shaded portion. • Note that the recording surface of disc must face the inside of DVD video camera/recorder. • Never touch the disc recording surface or pickup lens. English Pickup lens • Use the disc cleaning cloth provided to wipe off any dirt adhering to the disc recording surface. • Do not use a dirtied or scratched disc. • The recording side must face the inside (DVD video camera/recorder). 45