Hitachi DZ-GX20A Owners Guide - Page 44
Turning DVD Video Camera/Recorder On
UPC - 050585223509
View all Hitachi DZ-GX20A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Turning DVD Video Camera/Recorder On and Off While holding down the gray button at the right of power switch, set the switch according to each recording function: Set to "OFF": The DVD video camera/ recorder will turn off. Set to "P": To record still on SD memory card Set to "O": To record movie on DVDRAM or DVD-R disc Set to "N": To record still on DVDRAM disc Note: • Once you turn the DVD video camera/recorder on to let it recognize the disc, you can immediately record or play back by turning the DVD video camera/ recorder on again. However, if a long time has elapsed after the disc was inserted, it will take some time for the DVD video camera/recorder to start because it must recognize the disc again (see page 158). • It will take some time for the DVD video camera/ recorder to display the Disc Navigation screen after power is turned on. • If you turn the DVD video camera/recorder on, the ACCESS indicator will light or blink to show that the DVD video camera/recorder is recognizing the disc or card: During this time, no operation, such as recording, can be performed. After several seconds, the ACCESS indicator will go out, and operating the DVD video camera/recorder will be possible. If the ACCESS indicator does not go out, refer to "Check 4" on page 158. Power ON status During playback, set the power switch to "O" or "N" when using disc, or set it to "P" when using card. Turn the switch while holding down the gray button at the right of switch. ACCESS/PC indicator • When the DVD video camera/recorder is turned on, the self-diagnosis function will work and a message may appear. In this case, refer to "Trouble Messages" on page 160 and take corrective action. • While the ACCESS/PC or CARD ACCESS indicator is lit or blinking, do not violently open or close the LCD monitor. OFF OFF Power switch English 44